Max input / output points: 40 points.
Power supply voltage: DC24V.
Input points: 24 points.
Output points: 16 points.
Output type: transistor.
Power consumption (W): 32.
Weight (kg):0.65.
Size (WxHxD) mm:130x90x75.
FX1N series is a very powerful micro PLC, can be extended to up to
128 I/O points,
And can increase the special function module or the expansion board
FX2N-48ET.
Communication and data link function options make FX1N in the
volume, communication and special function modules and other
important applications is very perfect
FX2N-48ETA PLC unit can output 2 100KHz pulses at the same time,
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute position readout, absolute or
relative drive, and special pulse output control FX2N-48ET. Max
input / output points: 80 points.
Power supply voltage: 24VDC.
Input points: 40 points.
Output points: 40 points.
Output type: relay.
Power consumption: 40W.
Weight (kg):1.2.
Size (WxHxD) mm:285x90x87.
Note recording function, Component annotation can be recorded in
the program register.
Online program editor, online change the program will not lose the
working hours or stop production operation FX2N-48ET.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload
or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your
program.
Clock function and hour meter function, all of the PLC FX2N has a
real-time clock standard.
Continuous scanning function, to define the operation cycle for the
application of the continuous scan time.
Input filter adjustment function, you can use the input filter to
smooth the input signal (in the basic unit x000 to x017). Memory
format: EEPROM.
Number of steps: up to 16000 steps can be used.
Battery support: do not.
Method for writing and deleting: the device is installed on the
PLC, and is written and deleted by the peripheral device.
Note: built-in extension. Total points: 10 points.
Input points: 6 points.
Output points: 4 points.
Voltage: AC220V.
Output type: transisttor FX2N-48ET.
Outline dimension: 60*75*90.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful
control over a limited range of I/0.
FX1S provides up to 30 I/O points, and ccan be transmitted through
serial communication data,
MT models also have the ability to locate, widely used in a variety
of small mechanical equipment FX2N-48ET.
